A New Method for Obtaining Irreductive Water Saturation and Other Parameters

Yang Kebing; Liu Huan; Wang Lei; Huang Zhongneng; Bai Xinguo

doi:doi:10.11648/j.ogce.20210906.12

| Peer-Reviewed

A New Method for Obtaining Irreductive Water Saturation and Other Parameters

Yang Kebing, Liu Huan, Wang Lei, Huang Zhongneng, Bai Xinguo

Published in International Journal of Oil, Gas and Coal Engineering (Volume 9, Issue 6)

Received: 26 November 2021 Accepted: 11 December 2021 Published: 24 December 2021

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

The results show that the resistivity and water saturation data from a core obtained by core electrical experiments are power functions, which can reflect the conductivity characteristics of pore water in rock. Further research shows that when the resistivity data of power function shows a gentle change trend, it shows that the change of movable water pores affects the resistivity data, and when the resistivity data shows a drastic change trend, it shows that the irreducible water conductivity plays a leading role. Therefore, parameters such as irreducible water saturation and movable oil saturation can be determined from the morphological changes of the curve, just as the porosity lower limit of rocks can be determined. Compared with the irreducible water saturation data obtained by mercury injection and other data, a new method is proposed to determine the irreducible water saturation of a core by the cutoff value of slope of power function curve, and the movable oil saturation can be determined by the maximum curvature value of power function curve, which can further obtain the residual oil saturation. The preliminary application shows that the absolute error of irreducible water saturation and other parameters is within 5% and can be used in practice.

Published in	International Journal of Oil, Gas and Coal Engineering (Volume 9, Issue 6)
DOI	10.11648/j.ogce.20210906.12
Page(s)	93-97
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2021. Published by Science Publishing Group

Keywords

Core Electricity Experiment Data, Data Analysis, Power Function, Irreducible Water Saturation, Movable Oil Saturation

References

[1]	Shang B. Z., Hamman J. G., Chen H. L., and Caldwell D. H., “A Model to Correlate Permeability with Efficient Porosity and Irreducible Water Saturation”. SPE Annual Technical Conference and Exhibition, Denver, Colorado, USA, 2003.
[2]	Wang Y. D., Bandal M. S., Moreno J. S., and Sakdilah M. Z., “A Systematic Approach to Incorporate Capillary Pressure-Saturation Data into Reservoir Simulation”. SPE Asia Pacific Oil & Gas Conference and Exhibition, Adelaide, Australia, 2006.
[3]	Basbug B., and Karpyn Z. T., ”Estimation of Permeability from Porosity, Specific Surface Area, and Irreducible Water Saturation using an Artificial Neural Network”, Latin American & Caribbean Petroleum Engineering Conference, Buenos Aires, Argentina, 2007.
[4]	Yang Y. H., and Birmingham T. J., “Irreducible Water Saturation Has Been Determined As the Key Factor Governing Hydrocarbon Production from Low Permeability Carbonate at the Wattenberg Field in the Denver Julesburg Basin”. SPE Annual Technical Conference and Exhibition, Denver, Colorado, USA, 2008.
[5]	Goetz D., Knight R., and Tercier P., “A Laboratory Procedure For Estimating Irreducible Water Saturation From Cuttings”, The Log Analyst, 1996, 37 (04), 18-24.
[6]	Denney D., “Irreducible Water Saturation From Magnetic-Resonance-Imaging Logs”, Journal of Petroleum Technology, 1997, 49 (11), 1247-1249.
[7]	Oraby E., and Eubanks D. L., “Determination Of Irreducible Water Saturation Using Magnetic Resonance Imaging Logs (MRIL): A Case Study From East Texas, USAM”, Middle East Oil Show and Conference, Bahrain, 1997.
[8]	Solatpour R., Bryan J. L., and Kantzas A., “On Estimating Irreducible Water Saturation in Tight Formations Using Nuclear Magnetic Resonance Relaxometry”, SPE Canada Unconventional Resources Conference, Calgary, Alberta, Canada, 2018.
[9]	Goda H. M., Maier H., and Behrenbruch P., “Use of Artificial Intelligence Techniques for Predicting Irreducible Water Saturation - Australian Hydrocarbon Basins”, Asia Pacific Oil and Gas Conference and Exhibition, Jakarta, Indonesia, 2007.
[10]	Uguru C., Udofia A., and Oladiran O. O., “Estimating Irreducible Water Saturation and Relative Permeability From Logs”, Nigeria Annual International Conference and Exhibition, Tinapa - Calabar, Nigeria, 2010.
[11]	Li T., Zhou X., Cui Y. J., Xu J. X., and et al., “Derivation of Continuous Irreducible Water Saturation and Pore Throat Aperture Distribution from Well Logs in an Offshore Brownfield”, Offshore Technology Conference, Houston, Texas, USA, 2018.
[12]	Archie G. E., “The Electrical Resistivity Log as an Aid in Determining Some Reservoir Characteristics”, Transactions of the AIME, 1942, 146, 54-61.
[13]	Cassou G., Poirier-Coutansais X., and Ramamoorthy R., “Movable Oil Saturation Evaluation in an Ultra-Mature Carbonate Environment”, SPWLA Middle East Regional Symposium, Abu Dhabi, UAE, 2007.
[14]	Bustos U. D., Salazar B. G., Aldana I., Moreno W., and et al., “Understanding the Movable Oil and Free-Water Distribution in Heavy-Oil Sands, Llanos Basin, Colombia”, SPE Heavy and Extra Heavy Oil Conference, Latin America, Medellín, Colombia, 2014.

Cite This Article

Plain Text BibTeX RIS

APA Style

Yang Kebing, Liu Huan, Wang Lei, Huang Zhongneng, Bai Xinguo. (2021). A New Method for Obtaining Irreductive Water Saturation and Other Parameters. International Journal of Oil, Gas and Coal Engineering, 9(6), 93-97. https://doi.org/10.11648/j.ogce.20210906.12

Copy | Download

ACS Style

Yang Kebing; Liu Huan; Wang Lei; Huang Zhongneng; Bai Xinguo. A New Method for Obtaining Irreductive Water Saturation and Other Parameters. Int. J. Oil Gas Coal Eng. 2021, 9(6), 93-97. doi: 10.11648/j.ogce.20210906.12

Copy | Download

AMA Style

Yang Kebing, Liu Huan, Wang Lei, Huang Zhongneng, Bai Xinguo. A New Method for Obtaining Irreductive Water Saturation and Other Parameters. Int J Oil Gas Coal Eng. 2021;9(6):93-97. doi: 10.11648/j.ogce.20210906.12

Copy | Download

@article{10.11648/j.ogce.20210906.12,
  author = {Yang Kebing and Liu Huan and Wang Lei and Huang Zhongneng and Bai Xinguo},
  title = {A New Method for Obtaining Irreductive Water Saturation and Other Parameters},
  journal = {International Journal of Oil, Gas and Coal Engineering},
  volume = {9},
  number = {6},
  pages = {93-97},
  doi = {10.11648/j.ogce.20210906.12},
  url = {https://doi.org/10.11648/j.ogce.20210906.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ogce.20210906.12},
  abstract = {The results show that the resistivity and water saturation data from a core obtained by core electrical experiments are power functions, which can reflect the conductivity characteristics of pore water in rock. Further research shows that when the resistivity data of power function shows a gentle change trend, it shows that the change of movable water pores affects the resistivity data, and when the resistivity data shows a drastic change trend, it shows that the irreducible water conductivity plays a leading role. Therefore, parameters such as irreducible water saturation and movable oil saturation can be determined from the morphological changes of the curve, just as the porosity lower limit of rocks can be determined. Compared with the irreducible water saturation data obtained by mercury injection and other data, a new method is proposed to determine the irreducible water saturation of a core by the cutoff value of slope of power function curve, and the movable oil saturation can be determined by the maximum curvature value of power function curve, which can further obtain the residual oil saturation. The preliminary application shows that the absolute error of irreducible water saturation and other parameters is within 5% and can be used in practice.},
 year = {2021}
}

Copy | Download

TY  - JOUR
T1  - A New Method for Obtaining Irreductive Water Saturation and Other Parameters
AU  - Yang Kebing
AU  - Liu Huan
AU  - Wang Lei
AU  - Huang Zhongneng
AU  - Bai Xinguo
Y1  - 2021/12/24
PY  - 2021
N1  - https://doi.org/10.11648/j.ogce.20210906.12
DO  - 10.11648/j.ogce.20210906.12
T2  - International Journal of Oil, Gas and Coal Engineering
JF  - International Journal of Oil, Gas and Coal Engineering
JO  - International Journal of Oil, Gas and Coal Engineering
SP  - 93
EP  - 97
PB  - Science Publishing Group
SN  - 2376-7677
UR  - https://doi.org/10.11648/j.ogce.20210906.12
AB  - The results show that the resistivity and water saturation data from a core obtained by core electrical experiments are power functions, which can reflect the conductivity characteristics of pore water in rock. Further research shows that when the resistivity data of power function shows a gentle change trend, it shows that the change of movable water pores affects the resistivity data, and when the resistivity data shows a drastic change trend, it shows that the irreducible water conductivity plays a leading role. Therefore, parameters such as irreducible water saturation and movable oil saturation can be determined from the morphological changes of the curve, just as the porosity lower limit of rocks can be determined. Compared with the irreducible water saturation data obtained by mercury injection and other data, a new method is proposed to determine the irreducible water saturation of a core by the cutoff value of slope of power function curve, and the movable oil saturation can be determined by the maximum curvature value of power function curve, which can further obtain the residual oil saturation. The preliminary application shows that the absolute error of irreducible water saturation and other parameters is within 5% and can be used in practice.
VL  - 9
IS  - 6
ER  -

Copy | Download

Author Information

Yang Kebing

Petrochina Huabei Oilfield Company, Renqiu, China
Liu Huan

School of Tourism and Environment, Zhangjiakou University, Zhangjiakou, China
Wang Lei

Petrochina Huabei Oilfield Company, Renqiu, China
Huang Zhongneng

Petrochina Huabei Oilfield Company, Renqiu, China
Bai Xinguo

Petrochina Huabei Oilfield Company, Renqiu, China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Yang Kebing, Liu Huan, Wang Lei, Huang Zhongneng, Bai Xinguo. (2021). A New Method for Obtaining Irreductive Water Saturation and Other Parameters. International Journal of Oil, Gas and Coal Engineering, 9(6), 93-97. https://doi.org/10.11648/j.ogce.20210906.12

Copy | Download

ACS Style

Yang Kebing; Liu Huan; Wang Lei; Huang Zhongneng; Bai Xinguo. A New Method for Obtaining Irreductive Water Saturation and Other Parameters. Int. J. Oil Gas Coal Eng. 2021, 9(6), 93-97. doi: 10.11648/j.ogce.20210906.12

Copy | Download

AMA Style

Yang Kebing, Liu Huan, Wang Lei, Huang Zhongneng, Bai Xinguo. A New Method for Obtaining Irreductive Water Saturation and Other Parameters. Int J Oil Gas Coal Eng. 2021;9(6):93-97. doi: 10.11648/j.ogce.20210906.12

Copy | Download

@article{10.11648/j.ogce.20210906.12,
  author = {Yang Kebing and Liu Huan and Wang Lei and Huang Zhongneng and Bai Xinguo},
  title = {A New Method for Obtaining Irreductive Water Saturation and Other Parameters},
  journal = {International Journal of Oil, Gas and Coal Engineering},
  volume = {9},
  number = {6},
  pages = {93-97},
  doi = {10.11648/j.ogce.20210906.12},
  url = {https://doi.org/10.11648/j.ogce.20210906.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ogce.20210906.12},
  abstract = {The results show that the resistivity and water saturation data from a core obtained by core electrical experiments are power functions, which can reflect the conductivity characteristics of pore water in rock. Further research shows that when the resistivity data of power function shows a gentle change trend, it shows that the change of movable water pores affects the resistivity data, and when the resistivity data shows a drastic change trend, it shows that the irreducible water conductivity plays a leading role. Therefore, parameters such as irreducible water saturation and movable oil saturation can be determined from the morphological changes of the curve, just as the porosity lower limit of rocks can be determined. Compared with the irreducible water saturation data obtained by mercury injection and other data, a new method is proposed to determine the irreducible water saturation of a core by the cutoff value of slope of power function curve, and the movable oil saturation can be determined by the maximum curvature value of power function curve, which can further obtain the residual oil saturation. The preliminary application shows that the absolute error of irreducible water saturation and other parameters is within 5% and can be used in practice.},
 year = {2021}
}

Copy | Download

TY  - JOUR
T1  - A New Method for Obtaining Irreductive Water Saturation and Other Parameters
AU  - Yang Kebing
AU  - Liu Huan
AU  - Wang Lei
AU  - Huang Zhongneng
AU  - Bai Xinguo
Y1  - 2021/12/24
PY  - 2021
N1  - https://doi.org/10.11648/j.ogce.20210906.12
DO  - 10.11648/j.ogce.20210906.12
T2  - International Journal of Oil, Gas and Coal Engineering
JF  - International Journal of Oil, Gas and Coal Engineering
JO  - International Journal of Oil, Gas and Coal Engineering
SP  - 93
EP  - 97
PB  - Science Publishing Group
SN  - 2376-7677
UR  - https://doi.org/10.11648/j.ogce.20210906.12
AB  - The results show that the resistivity and water saturation data from a core obtained by core electrical experiments are power functions, which can reflect the conductivity characteristics of pore water in rock. Further research shows that when the resistivity data of power function shows a gentle change trend, it shows that the change of movable water pores affects the resistivity data, and when the resistivity data shows a drastic change trend, it shows that the irreducible water conductivity plays a leading role. Therefore, parameters such as irreducible water saturation and movable oil saturation can be determined from the morphological changes of the curve, just as the porosity lower limit of rocks can be determined. Compared with the irreducible water saturation data obtained by mercury injection and other data, a new method is proposed to determine the irreducible water saturation of a core by the cutoff value of slope of power function curve, and the movable oil saturation can be determined by the maximum curvature value of power function curve, which can further obtain the residual oil saturation. The preliminary application shows that the absolute error of irreducible water saturation and other parameters is within 5% and can be used in practice.
VL  - 9
IS  - 6
ER  -

Copy | Download